美女露出胸让男生摸个遍_舔射插啊～在线观看女女_91视频完整版_色就色欧美

Back

UTK Displacer Level Controller (High Pressure)

The high-pressure level switch is a displacer drive unit, which uses a single switch assembly for level alarm or control. These devices are designed for liquids with working pressures up to 250 bar and specific gravities of 0.40 and above. A permanent magnetic sensor is attached to the rotary switch drive. When the float/displacer rises correspondingly with the rise of the liquid, the corresponding sleeve will move into the range of the magnetic sensor and cause the switch to act accordingly.

Contact Us

Features

    1.Chamber material can choose 304 or 316 stainless steel

    2.The pressure can be up to 16MPa

    3.Temperature can be up to +300° C

    4.The lowest specific gravity is 0.40

Main Technical Parameters

Nominal pressure: ≤16.0MPa

Accuracy: Level control: ±4mm

Interface control: ±6mm

Flange standard: HG/T20592-2009,HG/T20615-2009 or on request

Ambient temperature: -40℃～+80℃

Medium temperature: -40℃≤T≤+150℃ (high temperature: T≤300℃)

Density: Level control: ρ≥0.5g/cm3

Interface control: ρ1-ρ2≥?0.25g/cm3

Viscosity: ≤1St(10-4m2/S)

Wetted material: 20, 304, 316L or on request

Power inlet: G1/2” (inner thread) or on request

Explosion-proof type: Flameproof?ExdⅡCT1～T5/T6 Gb

Intrinsic safety: ExiaⅡCT1～T5/T6 Ga

Functional safety level: SIL 2

Applications

Refining: Crude oil storage, crude oil desalination

Chemical: Buffer tank

Electricity:?Boiler sewage tank, condensate storage, flash tank, pre-flash tank

Solution

Related Products

您的瀏覽器當(dāng)前寬度低于1100px;請(qǐng)使用1300px以上寬度訪問。